IEI Technology WSB-9152 Скачать руководство пользователя страница 22

Страница: 22 / 258

WSB-9152 PICMG 1.0 SBC

Page 2

1.1 Introduction

Figure 1-1: WSB-9152

The WSB-9152 PICMG 1.0 CPU card is a Socket 479 card for Intel® Pentium® M and

Intel® Celeron® M processors. The WSB-9152 has a maximum front side bus (FSB)

frequency of 533 MHz and can support two dual channel DDR2 memory modules of up to

1 GB each. The WSB-9152 supports multiple display types including VGA, 18-bit dual

channel LVDS and DVI (WSB-9152DVI and WSB-9152SDVI only).

WSB-9152 storage options include two serial ATA (SATA) hard disk drives (HDD), two

IDE hard drives and a floppy disk drive (FDD). Two additional SATA II drives with 3.0 Gb/s

transfer speeds are supported by the WSB-9152S and WSB-9152SDVI models.

The WSB-9152 also supports two PCI Express (PCIe) Gigabit Ethernet (GbE) ports,

mouse or keyboard port, seven USB 2.0 ports and an onboard PCIe Mini Card expansion

slot that allows a PCIe Mini Card to be installed on the WSB-9152.

The WSB-9152 supports optional audio, using either the 5.1 channel or 7.1 channel HD

audio kit.

1.1.1 Model Variations

There are four WSB-9152 model variations as shown in

Table 1-1

Model Name

SATA 1.5 Gb/s

SATA II 3.0 Gb/s

DVI

WSB-9152-R21 Two

None

WSB-9152S-R21 Two

Two

None

Содержание WSB-9152



































































































































































































































































Результаты поиска

Содержание WSB-9152

Отзывы:

IEI Technology WSB-9152, Руководство пользователя, Страница: 22 / 258

Результаты поиска

Содержание WSB-9152

Отзывы: