IEI Technology TANK-600 Series, Руководство пользователя

Страница: 38 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 26
S te p 2:
Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 3-15 .
Figure 3-15: DB-9 Serial Port Connection
S te p 3:
Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
S tep 0:
3.10.3.2 DB-78 S e ria l P o rt Co n n e c tio n (Op tio n a l)
Follow the steps below to connect a serial device to the DB-78 serial port connector of the
TANK-600 system.
S te p 1:
Locate the DB-78 serial port . The location of the DB-78 serial port is shown in
Chapter 1 .
S te p 2:
Connect the DB-78 to COM port cable to the system . Insert the DB-78
connector end of cable into the DB-78 serial port. See Figure 3-16 .