IEI Technology TANK-600 Series, Руководство пользователя

Страница: 37 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 25
S te p 1:
Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 1 .
S te p 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-600. See Figure 3-14 .
Figure 3-14: LAN Connection
S te p 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.
3.10.3 S e ria l De vic e Co n n e c tio n
There are six RS-232 connectors via DB-9, two RS-232/422/485 connectors via DB-9 and
eight RS-232 connectors via DB-78 (optional) for serial device connection. Follow the
steps below to connect a serial device to the TANK-600.
3.10.3.1 DB-9 S e ria l P o rt Co n n e c tio n
Follow the steps below to connect a serial device to the DB-9 connector of the TANK-600
system.
S te p 1:
Locate the DB-9 connector . The locations of the DB-9 connectors are shown
in Chapter 1 .