IEI Technology TANK-600 Series, Руководство пользователя

Страница: 25 / 103

TANK-600 Em b e d d e d S ys te m
P a g e 13
3.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the maintenance of the
TANK-600 may result in permanent damage to the TANK-600 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-600. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the TANK-600 is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the TANK-600, place it on an
antic-static pad. This reduces the possibility of ESD damaging the TANK-600.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.
3.1.1 Hig h S u rfa c e Te m p e ra tu re
WARNING:
Some surfaces of the equipment may become hot during operation.
The surface temperature may be up to several tens of degrees hotter
than the ambient temperature. Under these circumstances, the
equipment needs to be protected against accidental contact.
The equipment is intended for installation in a RESTRICTED ACCESS LOCATION.