IEI Technology IVS-200-ULT2, Руководство пользователя

Страница: 88 / 116

IVS-200-ULT2 Embedded System
Page 76
5.3 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the IVS-200-ULT2 embedded system other
than those listed below. If any other components fail or need
replacement, contact the IEI reseller or vendor you purchased the
IVS-200-ULT2 from or contact an IEI sales representative directly. To
contact an IEI sales representative, please send an email to
321
sales@ieiworld.com .
The embedded system components listed below can all be replaced if they fail:

SO-DIMM module
 Internal hard disk drive (see
Section
864
3.6
)
 mSATA or PCIe Mini card (see
Section 3.7
)
 WLAN or WWAN module (see
Section 3.8
)
5.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the IVS-200-ULT2. Please make sure the purchased SO-DIMM
complies with the memory specifications of the IVS-200-ULT2.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1: Open the bottom cover.
Place the IVS-200-ULT2 on an anti-static pad with the
bottom panel facing up and the bottom cover opened (see
Section
865
3.4
).
Step 2: Locate the SO-DIMM
on the motherboard.