IEI Technology IVS-200-ULT2, Руководство пользователя

Страница: 32 / 116

IVS-200-ULT2 Embedded System
Page 20
 Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
3.5.2 AT/ATX Mode Selection
AT or ATX power mode can be used on the IVS-200-ULT2. The selection is made through
an AT/ATX switch located on the rear panel (
Figure 3-4
).
Figure 3-4: AT/ATX Mode Select Switch Location
3.5.3 ACC Mode On/Off
ACC mode can be turned on or off. The selection is made through an ACC mode on/off
switch located on the rear panel (
Figure 3-4
).
Figure 3-5: ACC Mode On/Off Switch Location