IEI Technology IVS-200-ULT2, Руководство пользователя

Страница: 33 / 116

IVS-200-ULT2 Embedded System
Page 21
3.6 Solid-State Drive Installation
One 2.5” SATA drive can be installed in the IVS-200-ULT2. The SATA drive is installed
into a removable hard drive bracket on the front panel. To install the SSD into the system,
please follow the steps below.
Step 1:
Loose the two captive screws that secure the bracket on the front panel.
Figure 3-6: SSD Bracket Retention Screws
Step 2:
Pull the bracket out to remove the bracket from the IVS-200-ULT2 (
764
Figure 3-7
).
Figure 3-7: Removing SSD Bracket
Step 3:
Place an SSD onto the bracket and secure the SSD with the bracket by inserting
four retention screws (M3*4) into the bottom of the SSD (
764
Figure 3-8
).