IEI Technology ISP-9652/9602, Руководство пользователя

Страница: 45 / 119

ISP-9652/9602 User Manual
Page 33
4.2.1 Installation Notices
Warning:
The installation instructions described in this manual should be carefully
followed in order to prevent damage to the ISP-9652/9602, its components
and injury to the user.
Before and during the installation please DO the following:
ƒ
Read the user manual:
o
The user manual provides a complete description of the ISP-9652/9602
installation instructions and configuration options.
ƒ
Wear an electrostatic discharge cuff (ESD):
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
ƒ
Place the ISP-9652/9602 on an antistatic pad:
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
ƒ
Turn all power to the ISP-9652/9602 off:
o
When working with the ISP-9652/9602, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the ISP-9652/9602 DO NOT:
ƒ
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
ƒ
Use the product before verifying all the cables and power connectors are
properly connected.
ƒ
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.