7.
Important notice
*
In areas where other wireless devices are in operation, transmission may
be interrupted.
*
CW-1dx is programmed differently for different regions. Using CW-1dx
outside of the region it was purchased in may violate local laws.
*
The maximum transmission range varies depending on the surrounding
environment such as radio wave conditions, composition of the wall,
weathering, etc. Therefore the specification of the transmission range is
not a definite range.
*
Unstable signal reception may be caused by the height, angle and
distance between TX and RX.
*
Keep TX and RX 3m (10ft) apart during set up/linking. the system may not
link if the TX and RX are too close.
*
Do not use in direct sunlight conditions.
*
Plug and unplug the connectors when the power SW is off.
*
The video signal of the CW-1dx is based on the HDMI standard, but due
to the characteristics of the radio transmission processing, it does not
guarantee compatibility for all the equipment.
*
Transmission delay is usually 2 to 3 frames. Worsening of the radio wave
causes the delay increase of +1 to +2 frames.
*
Before using an external power supply, always check that the voltage is
within the specified range and that the polarity of the connector is correct,
as this will avoid smoke or fire.
32
Содержание CW-1dx
Страница 1: ...CW 1dx Instruction Manual IDX Company Ltd ...
Страница 8: ...4 Name of parts and function TX Transmitter 7 ...
Страница 11: ... RX Receiver 10 ...
Страница 36: ...https www idx tv ...