IDX CW-1dx, Инструкция по эксплуатации

Страница: 24 / 36

4.
Setup- Master Unit (Access Point Mode)/Slave Unit (Station Mode)
As Default setting, the receiver (RX) is set to the master unit (Access Point
Mode) and the transmitter (TX) is set as the slave unit (Station Mode).
At the time of shipment, the connection method
②
(shown below chart) can
only be performed. It is because a smartphone or tablet can only access the
master unit device (Access Point Mode).
In case, preference is to operate under the connection method
①
(shown
above chart), the following setup is required.
23