IDX CW-1dx, Инструкция по эксплуатации

Страница: 31 / 36

5. Software Update
Software updates may be distributed to improve software, add features, or fix
bugs. Be sure to follow the instruction below to update the software.
Things to prepare (by customer)
⚫
Mini USB male to USB A female conversion connector (or conversion
cable)
⚫
USB memory
*Note: Only FAT32 format can be used. (EXFAT, NTTFS cannot be used)
Update procedure
(1) Download the firmware update file from IDX website. The file is in
compressed ZIP format.
(2) Unzip the downloaded file.
(3) In case the unzipped file includes instruction “Read Me First” or
“README”, be sure to read it carefully and follow the instructions. The
update firmware is the following two files.
【
Receiver (RX)
】
・
cw-1dx_rx_firmware.bin
：
For RX
【
Transmitter (TX)
】
・
CW-1dx_tx_firmware.bin
：
For TX
(4) Copy all the above files directly into the USB memory.
*Do not put in folders or rename or updates will not be performed.
The following illustrates the common procedure for the transmitter (TX) and
receiver (RX).
(5) Connect USB Memory into either transmitter (TX) or receiver (RX) via
USB conversion connector.
(6) Turn on the power switch of either TX or RX.
(7) When the update starts normally,
“U” is displayed on the LED indicator.
(8) Upgrade will be completed in about one and half minutes. LED
indication changes from “U” to “H” and reboot starts automatically.
(9) When automatic reboot is completed, LED display indicates “CH”. Turn
off the power switch to finish.
30