IDROBASE Adi, Руководство по эксплуатации и обслуживанию

Страница: 12 / 32

12
5.1 UNPACKING
The machine is packed in a simple cardboard wrapper to protect it. The cardboard wrapping must be re-
moved with appropriate means; the use of cellophane, staples and adhesive tape, in the packaging itself,
can cut or injure if not handled with care. To free the machine from its wrapping, settle on a flat surface
near the drain, the water connection and the use. Then proceed to a check of the integrity of the compo-
nents.
WARNING!
USE PERSONAL PROTECTIVE EQUIPMENT AND TAKE THE UTMOST CARE IN RELEASING THE CASING.
STRAPS OR STAPLES IF NOT HANDLED WITH CARE CAN INJURE OR INJURE EXPOSED PARTS.
The disposal of the packaging components must be carried out in compliance with the local regulations
in force. After unpacking the machine, make sure that the system is intact and complete with any required
accessories.
5.2 INACTIVITY
During periods of machine inactivity (machine in use or new machine still packed), keep it in a flat, clean
and dry place with a temperature of not less than 5 ° C and more than 40 ° C.
WARNING!
THE APPLIANCE CAN STAND THE FROST. DO NOT ALLOW TO STAND IN HARSH ENVIRONMENTS
WHERE THE TEMPERATURE COULD GO BELOW 0 ° C, WITH CONSEQUENT FORMATION OF ICE.
WARNING!
DO NOT FEED THE MACHINE WITH WATER AT TEMPERATURES ABOVE 40 ° C (104 ° F) OR BELOW 5
° C (41 ° F).
WARNING!
THE PRESSURE OF THE FEED WATER MUST BE GREATER THAN 1.5 AND LESS THAN 2.5 BAR.
WARNING!
DO NOT FEED THE MACHINE WITH BRACKISH WATER OR CONTAINING IMPURITIES. USING NON-
DRINKING WATER COULD SPREAD BACTERIA IN THE ENVIRONMENT, CREATING SERIOUS DAMAGE
TO PEOPLE, ANIMALS AND THE ENVIRONMENT ITSELF.
5 - UNPACKING AND INSTALLATION