IDROBASE Adi, Руководство по эксплуатации и обслуживанию

Страница: 18 / 32

18
DOC-L / DOC-LN / CSS
CSSN / CLM / CLMN
www.came.com
120
120
X
70 70
DOC-L
DOC-LN
DELTA-I
DELTA-SI
DOC-I
CSS
CSSN
SET-I
SET-K TSP00
TSP01 S6000
S9000
CLM
CLMN
SEM-2
❶
❷ ❸
❹
❺
24h
❻ ❼
❾
3
5
7
6
1
2
4
X = 458 (DOC-L/DOC-LN)
X = 958 (CSS/CSSN - CLM/CLMN)
⓫ ⓬ ❿
❼ ❼
❽
Italiano IT
English EN
Français FR
Русский RU
FA00591M4A
FA00591M4A - ver. 2 - 03/2017
5 - UNPACKING AND INSTALLATION
ENGLISH
Description
Natural-fi nish (DOC-L) or black (DOC-LN) 0.5 meter anodi-
zed aluminum post;
Natural-fi nish (CSS) or black (CSSN) 1.0 meter anodized
aluminum post;
Natural-fi nish (CLM) or black (CLMN) 1.0 meter anodized
aluminum post with tamper-proof brace;
Components
1. Fastening plate with braces
2. Brace-counter base-plate fastening screw UNI 5739
M8X18
3. Base-plate for post
4. Base-plate to post fastening screw UNI 6949 6,3X25
5. Small post
6. Device casing
7. Screw for case UNI 6954 3.9x25
Mounting
- Set up the fastening base-plate, fi t the screws and tighten then
by using the supplied nuts and washers.
❶
- Extract the perforated braces by using a screwdriver or pliers.
❷
- Set up a framework box that is larger than the fastening base-
plate and fi t it into the foundation pit.
❸
- Fill the framework box with cement. Sink the braces into the
cement, being careful that the cable-threading corrugated tube
fi ts through the hole.
❹
- Wait at least 24 hours for the cement to dry.
❺
- Remove the framework box and fi ll with earth the pit around
the cement slab.
❻❼
- Loosen the nuts and washers from the screws. The fastening
plate must be clean, perfectly level and with the threads
completely above surface.
❽
- Thread the cables through the tube.
❾
- Assemble the post to the base-plate by using the four supplied
self-threading screws.
❿
- Fasten the post to the plate by using the supplied nuts and
washers. ⓫
- Fit the container, turned as shown in the fi gure, and fasten it
using the supplied screws.
⓬