iDM TERRA SWM 3-13 HGL P, Техническая документация и инструкции по установке

Страница: 11 / 44

(C) IDM ENERGIESYSTEME GMBH
Installation instructions TERRA SWM
11
Description
Heat pump type Unit TERRA SWM 3-13
Maximum fl ow temperature °C 62
Refrigerant - R410A
Quantity of refrigerant kg 3.0
CO
2
- Equivalent t 6.3
Compressor oil EMKARATE RL 32-3MAF
Quantity of compressor oil l 0.74
Compressor stages - 1-stage modulated
Integrated brine pump Wilo Stratos Para 15/1-9
Nominal fl ow rate ground water with safety heat exchanger m³/h 2.16
Pressure loss ground water side with safety heat exchanger kPa 13.4
Integrated loading pump Wilo Stratos Para 15/1-9
Nominal fl ow heating water m³/h 1.5
Free residual pressure loading pump at nominal speed
2)
kPa 45.4
Pressure loss heating side at nominal speed 2) kPa 8.6
Maximum operating pressure heating side / brine side bar 3
Heating fl ow / -return fl ow R 1“
Electrical power supply compressor V / Hz 3~ 400 / 50
Electrical power supply controller V / Hz 1~ 230 / 50
Max. operating current of compressor A 9
Starting current A < 9
Power factor 0.97
Fuse of main power supply heat pump A 13
Fuse of control main supply A 13
1 If the size of the installation room is lower than the required minimum size, the room must be performed as an engine room according to EN 378.
2 at 80% pump capacity