NJR-T01SDI Command Guide
33
@GSS
I/O status (cont’d)
Parameter
*7 For status of the HDMI output connector, one of the codes below will be returned
in the following order: video output / audio output.
Error code
Video output status
Audio output status
0
Video is output correctly.
Audio is output correctly.
1
－
” is set to “ON”.
2
No source device is connected.
3
No video signal is input.
No audio signal is input.
4
Video output or audio output of the source device is muted.
6
The source device does not output the needed information
(packets) for outputting video or audio.
7
Unsupported signal is input.
Audio cannot be output.
9
－
The sink device that does not
support audio is connected.
B
No sink device is connected.
C
HDCP is being authenticated.
D
HDCP authentication failed.
Example
@GSS,1,1,1,0
@GSS,1,1,1,0,H30,1920 x 1080p 60Hz,
LINEAR PCM 48kHz, HDCP OFF
Getting all inputs statuses of channel 1.
- Input signal type
: 30-BIT COLOR
HDMI signal
- Video input signal
: 1080p 60Hz
- Audio input signal
: LPCM 48kHz
- HDCP
: No HDCP
@GSS,1,1,1,10
@GSS,1,1,1,10,HDCP 1.4 SUPPORT,
H30,00
Getting all outputs statuses of channel 1.
- HDCP authentication : HDCP 1.4
- Output signal type
: 30-BIT COLOR
HDMI signal
- Error code: Video and audio are output
correctly.
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
