NJR-T01SDI Command Guide
35
@GES
Monitor EDID (cont’d)
Parameter
*4 For audio support, sampling frequency, bit length, the number of channels, and
compressed audio:
Reply example
Description
AUDIO NOT
SUPPORT
A sink device that does not support audio signal is
connected.
LINEAR PCM-
32/44.1/48kHz-16/20
/24BIT-8CHANNEL
A sink device supporting audio signal is connected.
Supported sampling frequency (32, 44.1, 48, 88.2, 96,
176.4, 192), the number of bits (16, 20, 24), the number
of channels (1 to 8), and compressed audio support
status are returned.
Example
@GES,1,1,2,0
@GES,1,1,2,0,MSD-6208,
1920x1080 148.50MHz,DVI,AUDIO
NOT SUPPORT
Getting the sink device connected to
channel 1.
- Monitor name : MSD-6208
- Resolution
: 1920x1080
- Dot clock
: 148.50MHz
- HDMI
: Not supported
- Audio
: Not supported
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
@GIV
Version
Command group
Group A
Function
Getting
Format
@GIV, device, ch, reserved
Return value
@GIV, device, ch, reserved, id, ver
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJAR
Configurator through LAN, the value is “1” (fixed).
reserved: Reservation
“1” (fixed).
id: Model number
ver: Firmware version
Example
@GIV,1,1,1
@GIV,1,1,1, NJR-T01SDI,2.10
Getting the product information
of channel 1.
- Model : NJR-T01SDI
- Version : 2.10
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
