NJR-T01SDI Command Guide
20
@GHM / @SHM
Hot plug masking
Command group
Group A
Function
Getting
Setting
Format
@GHM, device, ch, reserved
@SHM, device, ch, port, time
Return value
@GHM, device, ch, reserved, time
@SHM, device, ch, port, time
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJAR
Configurator through LAN, the value is “1” (fixed).
reserved: Reservation
“1” (fixed).
port: Output connector
“2” fixed.
time: Masking time
0 = OFF (no masking) [Default], 2000 = 2 sec. to 15000 = 15 sec.
Set this value by the 1000 ms. If you set a value other than 0 for the lower 3 digits,
these values will be rounded down.
(For example, if you set it to 2955, the monitoring time is set to 2000 ms.)
Example
@GHM,1,1,1
@GHM,1,1,1,0
Getting the hot plug masking of channel 1.
OFF (no masking).
@SHM,1,1,2,0
@SHM,1,1,2,0
Setting the hot plug masking of channel 1 to OFF.
Completed normally.
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
