NJR-T01SDI Command Guide
16
4.4 Parameter input format
Parameter input formats are common for each setting.
If a command is input from the RS-232C connector of NJR-T01SDI or from the LAN connector using the
IP-NINJAR Configurator, “1” (fixed) is specified to “ch” (channel) because only one NJR-T01SDI can be
controlled.
If a command is input from the NJR-CTB, any channel can be specified because multiple NJR-T01SDI
devices that are connected over a network switch can be controlled.
Example: The command for setting mute of digital audio output
Format
@SAM, device, ch, port, mute
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from
IP-NINJAR Configurator through LAN, the value is “1” (fixed).
port: Connector
“1” (fixed).
mute: Audio mute
0 = Mute OFF [Default], 1 = Mute ON
10 GbE switch
LAN cable
Cable for extension
PC for control
LAN cable
NJR-T01SDI
Input channel 2
@SAM,1,2,1,1
NJR-CTB
NJR-T01SDI
NJR-T01SDI
NJR-T01SDI
Input channel 1
Input channel 3
Input channel 4
@SAM,1,3,1,1
[Fig. 4.1] Command input from NJR-CTB
