NJR-T01SDI Command Guide
9
3.2 LAN communication
The NJR-T01SDI can be accessed and controlled through LAN communication.
Connecting a control device to the NJR-T01SDI’s LAN connector enables system control and status queries
using the IP-NINJAR Configurator (configuration software for IP-NINJAR).
For operations from the IP-NINJAR Configurator, refer to the User Guide of IP-NINJAR Configurator.
The IP-NINJAR Configurator can be downloaded from
Note:
When using LAN communication to control the NJR-T01SDI, the terminal software cannot be used.
3.2.1 Setup LAN communication
Follow the procedure below.
(1) Connect the control device to the LAN connector of the NJR-T01SDI through a LAN cable.
(2) Start the IP-NINJAR Configurator in the control device.
(3) Send communication command from the Maintenance page of the IP-NINJAR Configurator.
You can control the NJR-T01SDI and get the status information using communication command.
PC for control
(1)
Cable connection
(2)
IP-NINJAR Configurator
(3)
Communication command
* PCs can control both NJR-T01SDI and IP-NINJAR series decoders by connecting to
either NJR-T01SDI or IP-NINJAR series decoders.
LAN connector
IP-NINJAR series
decoders
Cable for
extension
NJR-T01SDI (Encoder)
Audio D
*1
DIP switch
Video/audio D
*1
Audio A
*2
Group A
D/A conversion
A/D conversion
TX
CPU
SDI receiver
CPU
HDMI transmitter
Cable driver
A
UDI
O
I
NP
UT
RS
-23
2
C
LA
N
S
DI
O
UT
P
UT
A
UDI
O
O
UT
P
UT
HDM
I
O
UT
P
UT
S
DI
I
NP
UT
Group B
Scan
converter
Video
Video/audio D
*1
Video/audio D
*1
*1
Audio D: Digital audio
*2
Audio A: Analog audio
[Fig. 3.3] LAN communication setup