IDK FDX-S Series, Руководство пользователя

Страница: 58 / 117

FDX-S Series User Guide
58
10.4.4 Output equalizer
Menu Top
→
OUTPUT SETTINGS
→
SIGNAL EQUALIZATION
Setting for ALL, OUT01 to OUTn
Setting value
[Table 10.4] Output equalizer setting
Setting value Equalization
Cable length*
Shorter than
33 ft. (10 m)
33 ft. (10 m)
or longer
OFF [Default] No equalization
✓
N/A
LOW Low
✓ ✓
MIDDLE Middle
✓ ✓
HIGH High N/A
✓
* IDK
’s cable (24 AWG) was used
Each HDMI output connector includes an equalizer that compensates for signal attenuation when long HDMI
cables are connected.
Note:
If a cable equalizer, active cable, or the like is connected, the FDX-S may not equalize output correctly. In
such a case, set this menu to
“OFF”.
10.4.5 Output format
Menu Top
→
OUTPUT SETTINGS
→
SIGNAL FORMAT
Setting for OUT01 to OUTn
Setting value
・
AUTO [Default]
・
HDMI 422
・
DVI
・
HDMI RGB
・
HDMI 444
・
HDMI 420*
*Available only for 4K@59.94 / 50
You can select an output signal mode and color space of the output video.
The selected mode has priority and is output to the sink device with the optimal mode.
Notes:
・
Only channels of digital output board can be selected in this menu.
・ “HDMI 420” is only for 4K@60 output board.
・
YCbCr 4:2:0 output is available only for 4K@50/59.94/60 output, for other resolution the format is set to
“AUTO”.
・
For 4K YCbCr 4:2:0, only CEA-861 resolutions are supported.
・
When 4K YCbCr 4:4:4 signal is input, the FDX-S outputs the signal at YCbCr 4:2:0 to the sink device
supporting YCbCr 4:2:0 (not supporting YCbCr 4:4:4).
・
DVI output is 4K@30 or less input signals.
・
For 4K@60 HDBaseT output board outputs at YCbCr 4:2:0 automatically, if 4K YCbCr 4:4:4 signal is
input.
・
If
“DVI” is selected, digital audio is not output.
HDMI/DVI scan conversion output only