background image

Part 2 - Configuration

32

About

• 

User Agreement

: Click 

Accept and Use

 to agree to 

retaining the device data, and use the service.

The above screen pops up when booting up.

Record Setup

Refer to the 

Menu Use on page 20

 for basic 

information on using the Setup menus.

General

Configure general recording settings.

• 

Recycle

: When the recording disks become full, 

the system overwrites existing data with new data, 
starting with the oldest first. If 

Recycle

 is disabled, 

recording will simply stop when the recording disks 
reach their maximum capacity. 

• 

Record Audio

: The camera will record audio along 

with video.

• 

Intelligent Codec

: Automatically lowers bitrate when 

any motion is not detected.

The bitrate does not decrease when using intelligent 
codec for pre-event recording.

• 

Use H.265 Encoding

: Check to use H.265 codec, and 

uncheck to use H.264 codec.

• 

Event Record Dwell

: If linked recording is designated 

as an event-triggered action, recording takes place for 
the duration specified under this setting. 

Содержание TR-2416











































































Отзывы: