background image

Before reading this manual

3

Important Safeguards

1.  Read Instructions

All the safety and operating instructions should be read before the appliance 
is operated.

2.  Retain Instructions

The safety and operating instructions should be retained for future reference.

3.  Cleaning

Unplug this equipment from the wall outlet before cleaning it.  Do not use 
liquid aerosol cleaners.  Use a damp soft cloth for cleaning.

4.  Attachments

Never add any attachments and/or equipment without the approval of the 
manufacturer as such additions may result in the risk of fire, electric shock or 
other personal injury.

5.  Water and/or Moisture

Do not use this equipment near water or in contact with water.

6.  Ventilation

Place this equipment only in an upright position.  This equipment has an 
open-frame Switching Mode Power Supply (SMPS), which can cause a fire or 
electric shock if anything is inserted through the ventilation holes on the side 
of the equipment.

7.  Accessories

Do not place this equipment on an unstable cart, stand or table.  The 
equipment may fall, causing serious injury to a child or adult, and serious 
damage to the equipment.  Wall or shelf mounting should follow the 
manufacturer's instructions, and should use a mounting kit approved by the 
manufacturer.

This equipment and cart combination should be moved with care.  Quick 
stops, excessive force, and uneven surfaces may cause the equipment and cart 
combination to overturn.

8. Power Sources

This equipment should be operated only from the type of power source 
indicated on the marking label.  If you are not sure of the type of power, please 
consult your equipment dealer or local power company.
You may want to install a UPS (Uninterruptible Power Supply) system for 
safe operation in order to prevent damage caused by an unexpected power 
stoppage.  Any questions concerning UPS, consult your UPS retailer.

9. Power Cords

Operator or installer must remove power and TNT connections before 
handling the equipment.

10. Lightning

For added protection for this equipment during a lightning storm, or when it 
is left unattended and unused for long periods of time, unplug it from the wall 
outlet and disconnect the antenna or cable system.  This will prevent damage 
to the equipment due to lightning and power-line surges.

11. Overloading

Do not overload wall outlets and extension cords as this can result in the risk 
of fire or electric shock.

12. Objects and Liquids

Never push objects of any kind through openings of this equipment as they 
may touch dangerous voltage points or short out parts that could result in a 
fire or electric shock.  Never spill liquid of any kind on the equipment.

13. Servicing

Do not attempt to service this equipment yourself.  Refer all servicing to 
qualified service personnel.

14. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to qualified 
service personnel under the following conditions:
A.  When the power-supply cord or the plug has been damaged.
B.  If liquid is spilled, or objects have fallen into the equipment.
C.  If the equipment has been exposed to rain or water.
D.  If the equipment does not operate normally by following the operating 

instructions, adjust only those controls that are covered by the operating 
instructions as an improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the equipment to its normal operation.

E.  If the equipment has been dropped, or the cabinet damaged.
F.  When the equipment exhibits a distinct change in performance ─ this 

indicates a need for service.

15. Replacement Parts

When replacement parts are required, be sure the service technician has 
used replacement parts specified by the manufacturer or that have the same 
characteristics as the original part.  Unauthorized substitutions may result in 
fire, electric shock or other hazards.

16. Safety Check

Upon completion of any service or repairs to this equipment, ask the service 
technician to perform safety checks to determine that the equipment is in 
proper operating condition.

17. Field Installation

This installation should be made by a qualified service person and should 
conform to all local codes.

18. Correct Batteries 

Warning: Risk of explosion if battery is replaced by an incorrect type.  Dispose 
of used batteries according to the instructions.

19. Tmra

A manufacturer’s maximum recommended ambient temperature (Tmra) 
for the equipment must be specified so that the customer and installer may 
determine a suitable maximum operating environment for the equipment.

20. Elevated Operating Ambient Temperature

If installed in a closed or multi-unit rack assembly, the operating ambient 
temperature of the rack environment may be greater than room ambient.  
Therefore, consideration should be given to installing the equipment in an 
environment compatible with the manufacturer’s maximum rated ambient 
temperature (Tmra).

21. Reduced Air Flow

Installation of the equipment in the rack should be such that the amount of 
airflow required for safe operation of the equipment is not compromised.

22. Mechanical Loading

Mounting of the equipment in the rack should be such that a hazardous 
condition is not caused by uneven mechanical loading.

23. Circuit Overloading

Consideration should be given to connection of the equipment to supply 
circuit and the effect that overloading of circuits might have on over current 
protection and supply wiring.  Appropriate consideration of equipment 
nameplate ratings should be used when addressing this concern.

24. Reliable Earthing (Grounding)

Reliable grounding of rack mounted equipment should be maintained.  
Particular attention should be given to supply connections other than direct 
connections to the branch circuit (e.g., use of power strips).

Содержание TR-2416











































































Отзывы: