background image

Part 2 - Configuration

48

5

 

PTZ Reset: 

Reboots the camera’s panning / tilting 

and zoom settings.

6

 

Home Position

: Specify the camera’s home position.

 

Default

: Uses the factory-default position as the 

camera’s home position.

 

Custom

: Uses the user-defined position as the 

home position.

 

Select

 Set

 to change the home position.

7

 

Auto Run

: Specify which action to take if the camera 

has not been controlled for the specified duration of 
time.

Auto Pan

: Specify the camera’s panning direction. 

When Auto Pan is selected from a remote program, 
the camera pans in the direction selected here.

9

 

Auto Flip

: Automatically flips the image when the 

camera tilts past 90° to prevent the objects from 
appearing upside down.

 

Digital

: Flips the image left to right or top to 

bottom.

 

Mechanical

: Automatically pans or tilts the 

camera.

 

Off

: Disables Auto Flip.

0

 

Tilt-Range

: Specify the camera’s tilting range.

!

Restore

: Specify whether to restore the camera to 

its last position or function. Enabling this option 
restores the camera to its last position or function 
after being restarted.

@

 

Wiper

: Operate the wipers connected to the camera 

(stop after three round trips).

#

 Periodic Moving: 

Operate the PTZ camera at each 

operation cycle for the specified schedule period.

Privacy Masking Options

Select 

Name

 to rename the privacy masking area. Select 

the   icon to delete the existing privacy masking area. 
Select 

Privacy Masking Setup

 to display additional 

privacy masking area options. You can drag on the area 
with the mouse to resize it or add up to 16 different 
areas.

 

Edit

: Rename the selected privacy masking area.

 

Delete

: Delete the selected privacy masking area.

 

Save

: Save the changes and exit the privacy masking 

area options screen.

 

Cancel

: Exit the privacy masking area options screen 

without saving the changes.

Содержание DR-2504P-A




















































































































Отзывы: