iDirect iQ LTE Series, Инструкция по установке, поддержке и обслуживанию

Страница: 34 / 70

20 Installation, Support, and Maintenance Guide
iQ LTE Satellite Router
Components Typically Included in an Order
Remove items from the box only as needed. Verify all of the proper iQ LTE Satellite Router
components and accessory items listed in the order have been received, including the
optional equipment ordered. See
Section 4.4, Components Typically Included in an Order on
page 20 .
4.4 Components Typically Included in an Order
Prior to installation, account for all necessary components for a complete VSAT installation. If
any items are missing or damaged, contact the Network Operator/Distributor for
replacement.
A typical installation includes the following items:
•
1 (one) iQ LTE Satellite Router with installed AC or DC power supply
• 2 (two) hardware mounting ear kits
• 1 (one) LAN Ethernet cable
• 1 (one) Quick Start Guide (11 X 17 inch brochure)
• For DC (option 2), 1 (one) connector kit containing: one cable tie, one terminal block plug
(P/N Phoenix 1779848), one cable strain relief, P/N 1803947
• Additional components normally required are available in several sizes and types. Consult
the iDirect Account Manager for details. The components typically are:
•
One antenna
• IFL (Inter Facility Link) or coaxial cable appropriate for the installation
• One appropriate feed assembly for the antenna (OMT)
• One BUC (Block Up Converter)
• One LNB (Low Noise Block Converter)
4.5 Mounting the iQ LTE Satellite Router
This section describes the mounting of the iQ LTE Satellite Router. Follow the pre-installation
guidelines, see
Pre-Installation Guidelines on page 17 before attempting to install.
The iQ LTE Satellite Router requires a minimum of one rack unit (1.75 inches) of vertical rack
space. Measure the proposed rack location before mounting. If the iQ LTE Satellite Router is
mounted in an enclosed rack, the router must have adequate ventilation. An enclosed rack
should have louvered sides and top with fans to provide cooling air. Before using a particular
rack, check for obstructions that could impede installation.
1. All mating connectors must be prepared correctly for installation. See Appendix C, Cable
Preparation on page 39 (for all routers) and Appendix D, DC Power Supply Installation (for
routers with DC power supply options, only).
2. Attach the rack ears (included) to the iQ LTE Satellite Router with the hardware provided.
NOTE: LTE, WIFI, GPS antennas and accessories are not included.
NOTE: SIM cards are not included. Please acquire SIM cards from your service
provider with appropriate service plan.