background image

12

Installation, Support, and Maintenance Guide

iQ LTE Satellite Router

iQ LTE Satellite Router Front Panel LED Status Descriptions

3.2   iQ LTE Satellite Router Front Panel LED Status 

Descriptions

Descriptions for states of LEDs may vary between software releases. 

Check the release- specific 

Terminal WUI User Guide and Release Notes 

for details. 

Figure 3-1 

on page 11

 shows the front panel and 

Table 3-2

 describes the front panel LED color and status 

information:

Table 3-1. iQ LTE Satellite Router Front Panel Descriptions

Callout - Label

Description

1 - POWER (SAT)

Indicates power supply status and any power-related problems for the 

satellite module

2 - STATUS (SAT)

Indicates basic operational state and problems with the satellite module

3 - FAN1

Provides fan status for the primary fan

4 - RX (SAT)

Indicates the state of the satellite module receiver

5 - TX (SAT)

Indicates the state of the satellite module transmitter

6 - NET (SAT)

Indicates the state of the satellite network connection

7 - POWER (LTE)

Indicates power supply status and any power-related problems for the LTE 
module

8 - STATUS (LTE)

Indicates operational state and status with the LTE module GPS Lock and SIM 

installation

9 - FAN2

Provides fan status for the secondary fan

10 - CELL (LTE)

Indicates signal strength of the cellular network

11 - WiFi (LTE)

Indicates configuration mode (AP or WAN) status and activity of the WIFI 
connection 

12 - LAN (LTE)

Indicates status of the LTE connection

13 - SAT RESET

Reset button for the satellite module

14 - LTE RESET

Reset button for the LTE module

Table 3-2. iQ LTE Satellite Router Front Panel LED Descriptions 

Label

Signal Color/Type

Definition

FAN1/FAN2

Indicates the fan status

Solid Green

Indicates the correct operation of the fan 

Red

Indicates either the fan and/or temperature is at-fault

POWER 
(SAT)

Indicates satellite module power status and any power-
related problems

Off

No or low power input to the satellite module

 Solid Green

The satellite module power is on

Содержание iQ LTE Series







































































Отзывы: