iDirect iQ LTE Series, Инструкция по установке, поддержке и обслуживанию

Страница: 46 / 70

32 Installation, Support, and Maintenance Guide
iQ LTE Satellite Router
Removing and Replacing the Power Module
5.4 Removing and Replacing the Power Module
In the event the Power Module must be removed and/or replaced, Table 5-2 describes the
steps to take.
5.5 Repacking the iQ LTE Satellite Router
If the iQ LTE Satellite Router system is damaged or if the chassis needs to be moved to
another location, the unit needs to be repacked in the original shipping boxes.
To repack the system:
1.
Disconnect all cables.
2. Place the iQ LTE Satellite Router inside the original foam cutout in the shipping box.
3. Properly seal the box with packing tape.
For warranty service, obtain a Return Material Authorization (RMA) number from the reseller
or iDirect prior to shipping. Direct customers of iDirect, may contact the iDirect TAC directly
to obtain an RMA number and shipping instructions. Follow the shipping instructions,
complete the RMA form, and attach the form to the outside of the shipping box.
WARNING: Before installing or working on the outdoor equipment, unplug the
power cord from the power source. Ensure you always check if power is
disconnected.
Table 5-2. Removing and/or Replacing the Power Module
Event Steps to Take
Removing the Power Module • Make sure power cord is unplugged
• Unscrew chassis screw
• Pull firmly but gently on the handle pull of the power supply
to extract the power module from the slot
Replacing the Power Module
NOTE: Must replace with
similar power supply
• Slide in power supply
• Make sure the power supply is securely pushed in and flush
• Tighten screw
• Plug power cord into power supply input receptacle