Idex Knight DoseTech DMS, Инструкция по эксплуатации

Страница: 8 / 26

Page 8 0901048 Rev. C
Description of Screen Display
16.
To change the units of measure, use the SCROLL button to toggle between Fahrenheit/Gallons and Celsius/Liter.
Press ENTER to advance to the next screen.
17.
To choose a low level setting, use the SCROLL button to toggle between N/C and N/O.
Important:
If you are using a flow meter or the time based feature, you have the choice between N/C (normally closed) and N/
O (normally open). The option you choose should match the low level alarm that you are using.
Press ENTER to advance to the next screen.
18.
To set the alarm sound on or off, use the SCROLL button toggle to between on and off.
Press ENTER to advance to the next screen.
19.
To set the dispensing volumes, use the SCROLL button to toggle between volume A and volume B. Use the UP and
DOWN buttons to set the numerical value for the amount of detergent you wish to dispense for each volume.
Press ENTER to advance to the next screen.
20.
To set your preferred method of dosing, use the SCROLL button to toggle between Time Based Dosing and Flow
Metered Dosing.
Press ENTER to advance to the next screen.
21.
If you selected Flow Metered Dosing for the previous step, you will see the auto prime screen. To set auto prime to
on or off, use the SCROLL button to toggle between on and off. Note: This feature is only available with Flow
Metered Dosing.
Press ENTER to advance to the next screen.
PRESS SCROLL TO
SELECT WHICH UNITS
TO USE
PRESS SCROLL TO SELECT LOW
LEVEL STATE
PRESS SCROLL TO
TURN ALARM SOUND
ON OR OFF
SCROLL TO ENTER
VOLUME A 025 ml
VOLUME B 050 ml
PRESS SCROLL TO
SELECT DOSE MODE
PRESS SCROLL TO
SELECT SCROLL MODE
PRESS SCROLL TO
SELECT WHICH UNITS
TO USE
PRESS SCROLL TO SELECT LOW
LEVEL STATE
PRESS SCROLL TO TURN AUTO
PRIME ON OR OFF