4
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the right
to amend specifications without notice or obligation.
SAFETY
Please read this manual before operating the machinery.
Safety notices -
= Non-compliance could affect safety
= In case of damage to pump
= In case of personal hazards
In operation
Rotating parts
must
be guarded against accidental contact.
Water ring primer pulley, lift off cylinder area and assembly
need to be guarded
by
vehicle builder.
Do not
insert items into the suction tube when pump is running.
Discharge hoses
must not
be disconnected when the unit is running.
No
components must be unfastened when the unit is running.
When installing or removing the pump, suitable lifting equipment
must be used.
Suitable ear protection
must be worn
when pump is running – if necessary.
Maximum
allowable inlet pressure is
12 bar
.
Do not
run the pump without water for more than one minute.
Training
Godiva pumps must only be operated by trained personnel.
Maintenance
The user must maintain the equipment in an operational condition, as per regulation 5 in
the Provision and Use of Work Equipment Regulations 1998.
Environmental Protection
Used oil from the pump bearing housing must be disposed of in accordance with your
local regulations
Risk Assessment
It is the duty of the pump installer to make a method statement and risk assessment of
their operations when installing the pump, please contact Godiva Ltd. if assistance is
required.
Transportation and Storage
The pump is supplied mounted on a wooden pallet and covered with a tri-walled
cardboard box. This protection is suitable for standard methods of freight handling using
forklift trucks. No more than one pump should be stacked on top of another. The tri-walled
IMPORTANT
ATTENTION
!