background image

7

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should 

always be followed to reduce the risk of fire, electric shock and injury:

1)    Read and understand all the instructions.

2)    Follow all warnings and instructions marked on the product.

3)    Unplug this product from the wall outlet before cleaning. Do not use 

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

4)    Keep this product away from hot, humid conditions or strong 

sunlight, and don’t let it get wet or use it near water (for example, 

near a bath tub, kitchen sink, or swimming pool).

5)    Do not overload wall outlets and extension cords as this can result in 

the risk of fire or electric shock.

6)   Unplug this product from the wall outlet and obtain the service of our 

Repair Centre under the following conditions:

      •    When the power supply cord or plug is damaged or frayed.

      •    If the product fails to operate normally despite following the 

operating instructions.

      •    If the product has been dropped and the cabinet has been    

damaged.

      •    If the product exhibits a distinct change in performance.

7)    NEVER use your phone outdoors during a thunderstorm. Unplug the   

base from the telephone line and the mains socket when there are 

storms in your area. Damage caused by lightning is not covered by 

the guarantee.

8)    Do not use the telephone to report a gas leak in the vicinity of the 

leak.

9)    Use only the supplied NiMH (Nickel Metal Hydride) batteries that 

came with your phone or an authorised replacement recommended 

by the manufacturer. There is a risk of explosion if you replace the 

battery with an incorrect battery type. The use of other battery types 

or non-rechargeable batteries/primary cells can be dangerous. They 

may cause interference and/or damage to the unit or surroundings. 

The manufacturer will not be held liable for damage arising from 

such non-compliance.

10)  Do not use third party charging pods. Damage may be caused to the 

batteries.

11)  Please ensure that the batteries are inserted in the correct polarity.

12)  Dispose of batteries safely. Do not burn, immerse in water, 

disassemble, or puncture the batteries.

Package Content for single model

The package contains the following items:

•     1 Boomerang Handset

•     1 Base Station

•     1 Mains Power Adapter for the Base Station

•     1 Telephone Line Cord

•     2 AAA NiMH Rechargeable Batteries

•     1 Back Cover for the Boomerang Handset

•     1 Back Cover Unlock Tool

•     1 User Guide

Note:

 If you have purchased a Twin, Triple or Quad system, you will also 

have the corresponding extra handset(s) and batteries, a charging pod 

and a back cover for each extra handset.

Connection and Conditions for Use

You can connect your phone to a direct exchange line (DEL) on a local 

exchange with its own phone number; to an extension socket connected 

to a DEL; or to an extension on an approved compatible PBX. Do not 

connect as an extension to a pay phone.

The ringer equivalence numbers (REN) of all equipment (phones, fax 

machines, modems, etc.) connected to an exchange line must not add up 

to more than 4, otherwise one or more of them may not ring and/or 

answer calls correctly. The phone has a REN of 1, and most other 

telephones have a REN of 1 unless marked otherwise.

Содержание Boomerang Plus





























































Отзывы: