37
9
CLOCK AND ALARM SETTINGS
9.1
Date and Time Settings
If you have subscribed to the Calling Line Identification service, the time
and date settings will be automatically updated by the network when you
receive an incoming call, but you may still need to set the correct year.
You can also set the date and time manually.
1. From the home screen, press
M
.
2. Press
+
or
-
to
CLOCK&ALARM
and the press
M
to select.
3. Press
M
again to select
DATE & TIME
.
• The last stored date is displayed, with the third digit of the year
flashing.
4. Enter the current date and press
M
to confirm.
Enter the date in the format YY/MM/DD, e.g.03 May 2014 as [1], [4],
[0], [5], [0], [3].
If you make a mistake, press
m
to go back to the previous digit
entered.
5. Enter the current time and press
M
to confirm. The default time
format is
24 HOURS
.
(To change the time format, see 9.1.1
Change
the Time Format.
)
For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
For 12-hour format, enter 1:30 am or pm as [0],[1],[3],[0] and then
press
+
to select
am
, or press
-
to select
pm
.
If you make a mistake, press
m
to go back to the previous digit
entered.
• A confirmation tone is played.
6. Press
O
to return to standby mode.
12
ANSWERING MACHINE
Your phone includes a telephone answering machine that records
unanswered calls when it is on.
The answering machine can store up to 59 messages within the
maximum recording time of approximately 30 minutes and each message
can be up to 3 minutes long.
When the answering machine is on, calls are answered after the set RING
DELAY
.
If you have selected
RECORD MSGS
, then the caller can leave you a
message after hearing your announcement.
If a new message is recorded on your answering machine, the message
indicator on the base and the answering machine icon on the handset
both flash slowly.
If you have selected
ANSWER ONLY
mode, the caller can only listen to
your announcement but cannot leave you a message.
If the answering machine memory is full, the answering machine LED on
the base flashes rapidly, the answering machine icon on the handset
flashes quite quickly, and the
ANSWER ONLY
announcement will be
played to new callers. You will have to delete some messages before any
new ones can be recorded.
12.1
Turning the Answering Machine On/Off
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANS. ON/OFF
and then press
M
to select.
4. Press
+
or
-
to select
ON
or
OFF
and then press
M
to confirm.
• A confirmation tone is played.
5. Press
O
to return to standby mode.
Note:
If the answering machine is
OFF
and the Master PIN is still set at its
default
0000
, the answering machine will not answer any incoming calls.
However, if the Master PIN has been changed and Remote Access is
activated, it will answer incoming calls after 14 rings to allow remote
access, and the
ANSWER ONLY
announcement will play. (
See
12.8
Remote Access.
)
9.1.1
Change the Time Format
The time can be displayed either as 12-hour or 24-hour. The default
setting is
24 HOUR
.
1. From the home screen, press
M
.
2. Press
+
or
-
to
CLOCK&ALARM
and then press
M
to select.
3. Press
+
or
-
to
SET FORMAT
and then press
M
to select.
4. Press
M
again to select
TIME FORMAT
.
• The current setting is displayed.
5. Press
+
or
-
to select
12 HOUR
or
24 HOUR
and then press
M
to confirm.
• A confirmation tone is played.
6. Press
O
to return to standby mode.
9.1.2
Change the Date Format
The date can be displayed either as Month/Day (MM/DD) or Day/Month
(DD/MM). The default setting is
DD/MM
.
1. From the home screen, press
M
.
2. Press
+
or
-
to
CLOCK&ALARM
and then press
M
to select.
3. Press
+
or
-
to
SET FORMAT
and then press
M
to select.
4. Press
+
or
-
to
DATE FORMAT
and then press
M
to select.
• The current setting is displayed.
5. Press
+
or
-
to select
DD/MM
or
MM/DD
and then press
M
to confirm.
• A confirmation tone is played.
6. Press
O
to return to standby mode.
9.2
Alarm Settings
An alarm can be set on a handset, to sound at a set time only once or
repeated each day.
When an alarm is set, the alarm icon is shown on the handset display.
When the alarm time is reached, the handset will flash -ALARM- on the
display and sound an alarm for 1 minute.
When the alarm rings, you can press any key on the handset to stop the
ringing, even if the key lock is activated.
1. From the home screen, press
M
.
2. Press
+
or
-
to
CLOCK&ALARM
and then press
M
to select.
3. Press
+
or
-
to
ALARM
and then press
M
to select.
4. Press
+
or
-
to show your required alarm option.
OFF:
Turn alarm off
ONCE:
The alarm sounds once at the set time.
DAILY:
The alarm sounds daily at the set time.
5. Press
M
to select the displayed option.
6. If
ONCE
or
DAILY
is selected, enter the desired hour and minutes.
Press
+
to select am, or press
-
to select
pm
if the time is in
12-hour format.
7. Press
M
to confirm the alarm setting.
• A confirmation tone is played.
8. Press
O
to return to standby mode.
9.2.1
Set the Alarm Tone
You can select from 3 alarm melodies.
1. From the home screen, press
M
.
2. Press
+
or
-
to
CLOCK&ALARM
and then press
M
to select.
3. Press
+
or
-
to
ALARM MELODY
and then press
M
to select.
4. Press
+
or
-
to select the desired alarm tone (each tone will
sound as it is selected) and then press
M
to confirm.
• A confirmation tone is played.
5. Press
O
to return to standby mode.
12.2
Answer Mode
The phone comes with two pre-recorded announcements for the
respective answer modes:
ANSWER ONLY
and
RECORD MSGS
.
By default, the answer mode is
RECORD MSGS
, which allows a caller to
leave a message on the answering machine after the announcement. If
changed to
ANSWER ONLY
mode, it does not allow callers to leave
messages on the answering machine after the announcement.
12.3
Set Answer Mode
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANSWER MODE
and then press
M
to select.
4. Press
+
or
-
to select
ANSWER ONLY
or
RECORD MSGS
and
then press
M
to confirm - a confirmation tone is played.
12.4
Answering Machine Settings
12.4.1 Set the Ring Delay
You can set the number of rings before the answering machine answers a
call and plays the announcement, from 2 to 7
RINGS
or
TOLL SAVER
.
IMPORTANT:
If your network voice messaging (e.g. the 1571 service) is
enabled, you must set the
RING DELAY
to less than 6 rings, or the
network service will answer calls before your telephone answering
machine and prevent it from recording any messages.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANS. SETTING
and then press
M
.
4. Press
M
to select
RING DELAY
.
5. Press
+
or
-
to select
2 RINGS – 7 RINGS
or
TOLL SAVER
and
then press
M
to confirm - a confirmation tone is played.
Note:
If
TOLL SAVER
is set, the answering machine answers incoming
calls on the 5th ring if you have no new messages, or 3rd ring if you do.
If using Remote Access to check messages, if it does not answer on the
3rd ring, you have no new messages, so can hang up and save the cost of
a call.
12.4.2 Activate/Deactivate Remote Access
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANS. SETTING
and then press
M
to select.
4. Press
+
or
-
to
REMOTE ACC.
and then press
M
to select.
5. Press
+
or
-
to select
ACTIVATE
or
DEACTIVATE
and then
press
M
to confirm - a confirmation tone is played.
Note:
If the remote control access is activated, you can check the
messages on your answering machine when you are away from home, by
calling from another phone.
The Master PIN is used for accessing the answering machine remotely. If
your answering machine is off, the Master PIN must be changed from its
default
0000
before you can use the remote access.
12.4.3 Change the Voice Language
You may be able to select a different language for the answering
machine’s pre- recorded announcements. The default setting is
ENGLISH
.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANS. SETTING
and then press
M
to select.
4. Press
+
or
-
to
LANGUAGE
and then press
M
to select.
5. Press
+
or
-
to select your preferred language (if available)
and then press
M
to confirm - a confirmation tone is played.
12.5
Message Playback
When there are new messages on the answering machine, the tape icon
flashes on the handset screen.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
M
again to select
PLAY
.
• Messages automatically play through the handset’s loudspeaker.
• Messages are played from the newest first. When all new
messages have played, the play back stops and you must start
play again to listen to old messages again.
• The display shows the message number and Date/Time of the call.
• Press
F
to listen to messages through the handset earpiece.
4. During playback, press
M
, then
+
or
-
for the options:
Note:
To return to the screen showing the message number and
date/time, press
m
.
5. Press
O
to stop playback and return to standby mode.
12.6
Delete All Messages
Note:
Only old messages can be deleted. New messages must be played
before they can be deleted.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
DELETE ALL
and then press
M
to select.
•
CONFIRM?
is displayed.
4. Press
M
again to confirm - a confirmation tone is played.
12.7 Announcement
When the answering system answers a call, either the pre-recorded or
your own personal announcement is played to the caller.
The phone has two pre-recorded announcements for the answer modes:
ANSWER ONLY
and
RECORD MSGS
. By default, the answer mode is
RECORD MSGS
, which allows a caller to leave a message on the
answering machine after the announcement. This can be changed to
ANSWER ONLY
mode, which does not allow callers to leave messages on
the answering machine after hearing the announcement.
12.7.1 Record a Personal Announcement
You can replace the default announcements with your own personal
ones, each of up to 2 minutes long.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANNOUNCEMENT
and then press
M
to select.
4. Press
+
or
-
to select
ANSWER ONLY
or
RECORD MSGS
and
then press
M
to confirm.
5. Press
+
or
-
to
RECORD ANNC
and then press
M
.
• A confirmation tone is played and RECORDING is shown.
6. Speak into the handset and press
M
again to end the recording.
•
A confirmation tone plays and ANNOUNCEMENT is shown.
12.7.2 Listen to an announcement
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANNOUNCEMENT
and then press
M
to select.
4. Press
+
or
-
to select
ANSWER ONLY
or
RECORD MSGS
and
then press
M
to confirm.
5. Press
M
to select
PLAY.
• The announcement plays through the handset speaker.
• Press
F
to listen to the announcement through the earpiece.
12.7.3 Delete a Personal Announcement
If you want to return to using the default announcement, simply delete
your personal announcement.
1. From the home screen, press
M
.
2. Press
M
again to select
ANS. SYSTEM
.
3. Press
+
or
-
to
ANNOUNCEMENT
and then press
M
to select.
4. Press
+
or
-
to select
ANSWER ONLY
or
RECORD MSGS
and
then press
M
to confirm.
5. Press
+
or
-
to
DELETE
and press
M
to confirm.
• The default announcement plays through the speaker.
• Press
F
to listen to the announcement through the earpiece.
12.8
Remote Access
The phone lets you listen to the messages on your answering machine, or
otherwise operate your answering machine by calling in to your
answering machine from another touch-tone phone.
You need to enter a remote access code (same as your Master PIN) to
access your answering machine remotely.
The remote access code is used to prevent unauthorised access of your
answering machine.
Remote Access must be enabled if you want to use this feature.
(See
12.4.2
Activate/Deactivate Remote
Access.)
12.8.1
Access the Answering Machine Remotely
1. Dial your phone number from any touch-tone phone.
2. When your answering machine answers your call and starts playing
your announcement, press the
#
key.
• The announcement will stop playing.
3. Enter your Master PIN code within 8 seconds using the numeric
keypad on the touch-tone phone.
Note that the answering machine will drop the call if you do not
enter the Master PIN within 8 seconds.
4. If the code is accepted, you will hear a confirmation tone.
5. The answering machine will start playing all the messages on your
answering machine, beginning with new messages, or if there are
no recorded messages you will hear four beeps.
6. Use the keypad on the touch-tone phone to carry out the following
operations:
When you have finished listening to your messages, simply hang up the
phone to end.
Note:
If your answering machine is off but
Remote Access
is activated
(See
12.4.2
Activate/Deactivate Remote
Access)
, the answering machine will
answer your call after 14 rings, so that you can access it remotely, and
the
ANSWER ONLY
announcement will play.
If you enter an incorrect Remote Access Code, you will hear a triple-beep
error tone after 8 digits have been detected, and you will need to enter
the code again.
