11
2
INSTALLING YOUR PHONE
2.1
Connecting the Base Station
1) Plug the mains power cable and
telephone line cord into the sockets
in the underside of the base
station.
2) Plug the power adapter into a
100 - 240Vac, 50 - 60Hz mains power
socket, and the telephone line cord into a telephone line socket.
Warning:
Always use the cables provided in the box.
Use only the supplied adaptor. Using other adaptors may damage the
unit.
Note:
Place the base unit within easy reach of a mains power socket.
Never try to lengthen the mains power cable.
The base station needs mains power for normal operation, and the
cordless handsets will not work without it.
2.2
Installing and Charging the Rechargeable Batteries
1) Insert the 2 supplied batteries into the battery
compartment, observing the correct polarity,
as shown.
Warning:
Use only the supplied NiMH rechargeable
batteries.
2) Place the back cover over the back of the
handset and press down until it clicks into place.
3) Place the handset on the base and charge for
15 hours before using the handset for the first
time.
•
The handset will give a double beep when it is properly placed on
charge and the battery charging indicator on the base or charging
pod lights up to indicate charging.
2.3
Removing the back cover of the Boomerang Handset
Insert the supplied key int
o the groove as indicated in the illustration and
twist it clockwise to release the back cover.
If you have a broadband line
If you connect your telephone to a line with a broadband connection,
you will need to insert a micro-filter between the telephone and the
telephone line; otherwise you may get interference between the
telephone and the broadband, which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband micro-filters contact your broadband
supplier.
