IDEC MICROSmart FC6A Series, Руководство пользователя

Страница: 235 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 4-5
4: O
PERATION
B
ASICS
4.
Enter I0 in the Tag Name field, and click OK .
Note:
• To enter an NO contact from the right-click menu, right-click at the location to insert the NO contact, and on the right-click menu, click Basic
Instructions (B) , then A (Normally Open) .
• To enter an NO contact from the keyboard, press A to display the Coil Selection dialog box. Select A (Normally Open) , and then press
(Enter).
A NO contact of input I0 is programmed in the first column of the first ladder line.
Next, program the ANDN instruction by inserting a NC contact of input I1.
5.
From the WindLDR menu bar, select Home > Basic > B (Normally Closed) .
6.
Move the mouse pointer to the second column of the first ladder line where you want to insert a NC contact, and click the left
mouse button.
7.
Double-click Normally Closed .
The B (Normally Closed) dialog box is displayed.
8.
Enter I1 in the Tag Name field, and click OK .
An NC contact of input I1 is programmed in the second column of the first ladder line.
At the end of the first ladder line, program the OUT instruction by inserting a NO coil of output Q0.
9.
From the WindLDR menu bar, select Home > Basic > OUT (Output) .
10.
Move the mouse pointer to the third column of the first ladder line where you want to insert an output coil, and click the left
mouse button.
Note: Another method to insert an instruction (either basic or advanced) is to type the instruction symbol, OUT, where you want to insert the
instruction.
Enter