IDEC MICROSmart FC6A Series, Руководство пользователя

Страница: 115 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 2-85
2: P
RODUCT
S
PECIFICATIONS
*1 The total input delay time increases in proportion to the number of channels used. Input channels that have been set to unused are not
included in the number of enabled input channels.
*2 FC6A-J8A1 (Version lower than 200) supports 4096 (12 bits) digital resolution.
The input values per step are as follows:
Voltage: 2.44 mV (0 to 10 V), 4.88 mV (-10 to +10 V)
Current: 4.88
μ A (0 to 20 mA), 3.91 μ A (4 to 20 mA)
When using FC6A-J8A1 (Version 200 or later), the digital resolution can be selected from 12 bits or 16 bits in Analog I/O Module Configuration
dialog box in WindLDR.
*3 The arbitrary setting is a function that uses the digital resolution data by scaling it to arbitrary data (that arbitrarily sets the lower limit value and
the upper limit value). The range setting (-32,768 to 32,767) is specified with data registers.
Example: When -5 V is input, 1,024 is displayed as long as the arbitrary setting is not configured, but -500 is displayed when the arbitrary
setting is configured as upper limit value = 1,000 and lower limit value = -1,000, and this makes it easier to intuitively read the input
voltage value.
*4 Input data out of range is reflected in the status of the analog I/O module.
Mixed Analog I/O Module
Selection of Input Type and Input
Range
Using programming software
Calibration or Verification to Maintain
Rated Accuracy
Not possible
Type No. FC6A-L06A1 FC6A-L03CN1
Input Type
and
Input Range
Voltage
0 to 10 V
-10 to 10 V
Current
4 to 20 mA
0 to 20 mA
Thermocouple ―
(K) -200 to 1,300°C (-328 to 2,372°F)
(J) -200 to 1,000°C (-328 to 1,832°F)
(R) 0 to 1,760°C (32 to 3,200°F)
(S) 0 to 1,760°C (32 to 3,200°F)
(B) 0 to 1,820°C (32 to 3,308°F)
(E) -200 to 800°C (-328 to 1,472°F)
(T) -200 to 400°C (-328 to 752°F)
(N) -200 to 1,300°C (-328 to 2,372°F)
(C) 0 to 2,315°C (32 to 4,199°F)
Resistance Thermometer ―
Pt100: -200 to +850°C (-328 to 1,562°F)
Pt1000: -200 to +600°C (-328 to 1,112°F)
NI100: -60 to +180°C (-76 to 356°F)
NI1000: -60 to +180°C (-76 to 356°F)
Thermistor ―
Resistor ―
Input
Impedance
Voltage 1 M Ω or higher
Current 50 Ω or lower
Thermocouple 1 M Ω or higher
Resistance Thermometer 1 M Ω or higher
Thermistor 1 M Ω or higher
Resistor 1 M Ω or higher
Type No. FC6A-J2C1 FC6A-J4A1 FC6A-J8A1 FC6A-J4CN1 FC6A-J4CH1Y FC6A-J8CU1
Lower Limit Value=-1,000 -500
Raw Input Value
Input Voltage Value
1,024
-5 V
4,095
10 V
0
-10 V
Upper Limit Value=1,000
When the digital resolution data is 12 bits and the input range is -10 to +10 V