57
HS5E-K Interlock Switches with Key
Ratings
Contact Rating
Rated Insulation Voltage (Ui) (Note 1)
250V
Rated Thermal Current (Ith)
Operating temperature:
–25°C to 60°C: 2 .5A max .
60°C to 65°C: 1 .5A max .
65°C to 70°C: 1 .0A max .
Rated Voltage (Ue)
30V
125V
250V
Rated
Current
(Ie)
(Note 2)
AC
Resistive Load (AC-12)
−
2A
1A
Inductive Load (AC-15)
−
1A
0 .5A
DC
Resistive Load (DC-12)
2A
0 .4A
0 .2A
Inductive Load (DC-15)
1A
0 .22A
0 .1A
Minimum applicable load (reference value) = 3V AC/DC, 5 mA
(Applicable range may vary with operating conditions and load types .)
Note 1: UL rating:
125V
Note 2: TÜV rating:
AC-15, 0 .5A/250V, DC-13, 0 .22A/125V
UL, c-UL rating: Pilot Duty AC 0 .5A/125V,
Pilot Duty DC 0 .22A/125V
Key Specifications
Operating Method
2-position maintained
Mechanical Durability
100,000 operations minimum
Insertion/Removal Durability
10,000 operations minimum
Operator Strength
1 .0 N·m minimum
Direct Opening Force
0 .6 N·m minimum
Direct Opening Angle
60° minimum
Part No. Development
H S 5 E - K V A 0 L 0 3 - 2 A 5 0 1
VA:
VD:
Circuit Code
Pilot Light
0: None
Main
Circuit
Door Monitor
Circuit
Lock Monitor
Circuit
1NC, 1NO
2NC
—
—
1NC, 1NO
2NC
Rear Unlocking Button
L: With
Blank: Without
Cable Length
03: 3m
05: 5m
Key removal specifications
A: Removable in
all positions
B: Removable at UNLOCK
C: Removable at LOCK
Key number
Blank: Standard Key
number (500)
or
501 to 515
Operator position
2: 2-position
General Specifications
Applicable Standards
ISO14119, IEC60947-5-1,
EN60947-5-1 (TÜV approval), EN1088,
GS-ET-19 (TÜV approval),
UL508 (UL recognition),
CSA C22 .2 No . 14 (c-UL recognized)
IEC60204-1/EN60204-1
(applicable standards for use)
Operating
Temperature
-25 to +70°C (No freezing)
Relative Humidity
45 to 85% (No condensation)
Storage Temperature
-40 to +80°C (No freezing)
Pollution Degree
3
Impulse Withstand
Voltage
2 .5 kV
Insulation Resistance
(500V DC megger)
Between live and dead metal parts: 100 MΩ
minimum (500V DC megger)
Between live metal part and ground:
100 MΩ minimum (500V DC megger)
Between live metal parts:
100 MΩ minimum (500V DC megger)
Between terminals of the same pole:
100 MΩ minimum
Electric Shock Class
Class II (IEC61140)
Degree of Protection
IP65 (IEC60529)
Shock Resistance
Operating extremes: 100 m/s
2
Damage limits:
1,000 m/s
2
Vibration Resistance
Operating extremes:
10 to 55 Hz, amplitude 0 .35 mm
Damage limits: 30 Hz, amplitude 1 .5 mm
Actuator Operating
Speed
0 .05 to 1 .0 m/s
Direct Opening Travel
Actuator HS9Z-A51: 11 mm minimum
Actuator HS9Z-A51A/A52/A52A/A53/A55: 12 mm
minimum
Direct Opening Force
80N minimum
Actuator Retention
Force (Note 1)
1,400N minimum (GS-ET-19)
Operating Frequency
900 operations per hour
Rear Unlocking
Button Mechanical
Durability
3,000 operations minimum (HS5E-K
L)
Mechanical Durability
1,000,000 operations minimum (GS-ET-19)
Electrical Durability
100,000 operations minimum (AC-12, 250V, 1A)
1,000,000 operations minimum (24V AC/DC, 100
mA)
(Operating frequency: 900 operations per hour)
Performance between
41 and 42 when head
is removed
Mechanical durability: 10 operations minimum
Insulation resistance: 100 M
Ω
(initial value)
Withstand voltage: 1,000V for 1 minute (initial value)
Conditional Short-
circuit Current
50A (250V) (Note 2)
Cable
UL2464, No . 22 AWG
(12-core, 0 .3 mm
2
or equivalent/core)
Cable Diameter
ø7 .6 mm
Weight (approx .)
510g (3m cable), 680g (5m cable)
Note 1: See page 61 for actuator retention force .
Note 2: Use 250V/10A fast-blow fuse for short-circuit protection .
New interlock switches that can be locked and unlocked with a key.
•
Head removal detection circuitry .
•
High-security pin tumbler key is used . Sixteen types of key
numbers are available .
•
Available with rear unlocking button for emergency escape .
•
Accessory available for aluminum frame mounting .
•
Gold-plated contacts .
•
The locking strength is 1400N minimum . (GS-ET-19)
•
The head orientation can be rotated, allowing 8 different
actuator entries .
•
Metal actuator entry slot ensures high durability .
•
Actuator with rubber bushings alleviates the impact of
the actuator entry slot .
•
Environmentally-friendly . RoHs directive compliant .
•
Double insulation structure . No need for grounding .
•
Compact body: 35 × 40 × 146 mm
Right-angle Actuator
(SUS304)
Straight
Actuator
Right-angle Actuator
w/rubber bushings
Angle Adjustable
Actuator (vertical)
HS5E-K
