IDEAL Stripmaster 950, Руководство пользователя

Страница: 3 / 16

3
Introduction
The IDEAL Stripmaster
®
Models 950™, 950-1 and 954 Wire Strippers are electrically operated, pneumatic precision production tools designed to strip a
variety of insulation types in the 10 to 30 AWG range.
Each unit is equipped to accommodate up to six different wire guide/blade and strip length configurations, allowing operators to strip multiple wire diame-
ters and insulations without switching tools or re-installing blade sets.
Consult the factory for standard guide and blade set availability. Special guides and blades are available upon request.
Warranty and Service Policy
Each unit is warranted to be free from defects in materials and workmanship under normal use and service for a period of 12 months after the date of
purchase. The obligations of IDEAL under this warranty shall be limited to repairing at the Sycamore, Illinois manufacturing facility any unit which
shall, within the 12 month period, be returned to use with the transportation charges prepaid, and with our examination shall disclosed to our satisfac-
tion to have been defective. This warranty shall not apply to any model which has been altered or repaired outside the factory in any way so as to affect
its operation nor which has been subject to misuse, negligence, accident or installed or operated in any other way than in accordance with our instruc-
tions, nor shall this warranty extend to repairs or replacement made necessary by the use of accessories not recommended by IDEAL.
Technical Data
Strip Lengths........................... Minimum: .125 inches (3mm)
Maximum: .63 inches (16mm)
Strip Capacity.......................... Minimum: #30 AWG (.05mm
2
)
Maximum: #10 AWG (6.0mm
2
)
Accuracy: ................................................. Meets Military specifications in most applications
Voltage: .................................................... 12 volts required for operation
120V/60Hz transformer supplied as standard
For 220V/50Hz application, order 45-951 transformer
Air Pressure: ............................................ 65 PSI max.
Air Filter: .................................................. Recommended, but not required
In-line Oiler: ............................................. Not required
Blade Type: .............................................. Heat treated steel knife or die-type blades are available
Guide Bushings:....................................... Precision molded and machined Delrin
Strip Cycle: .............................................. Electronically adjustable strip and return speed
Dimensions: .................................. Width: 4-7/8 inches (124mm)
Depth: 10-1/2 inches (267mm)
Height: 5-1/4 inches (133mm)
Warranty:.................................................. 1-year limited warranty
Unpacking
Your IDEAL Stripmaster
®
Model 950™ and Stripmaster
®
Model 954 Wire Strippers have been factory preset and tested with the blades and wire guides
specified. Installation and hook-up of the unit to a CLEAN, DRY, REGULATED AIR SUPPLY IS REQUIRED FOR PROPER PERFORMANCE.
Models 950, 954 and 950-1 come equipped with a 12-volt adapter, air hose, IDEAL Mini T
®
Cutter (45-260), regulator mounting bracket, air regulator
kit and a set of hex key wrenches.
Description Cat. No.
Stripmaster
®
Model 950™ 45-950
Stripmaster
®
Model 954™ 45-954 (45-950 w/permanent face plate)
Special Stripmaster Model 45-950-1 45-950-1
Permanent Gripper Assembly (faceplate only) 45-950-4
Replacement Blades Consult Factory
Replacement Bushings Consult Factory
Air Regulator Kit 45-906
120V/60Hz Adapter K-7156
220V/50Hz Adapter 45-951
T
®
-Cutter Lite 45-260
Hex Key Set 691.02
Air Hose 45-807
Regulator Mounting Bracket LB-1135