IDEAL Networks SignalTEK NT, Руководство пользователя

Страница: 23 / 58

SignalTEK NT 156875 Iss 3
User Guide Page 23
With an Active Remote or a SignalTEK NT Remote Unit termination the possible faults
detected are:
Fig 26 Open circuit by pin Fig 27 Short circuit by pin
Fig 28 Crossed pairs Fig 29 Split pairs
Fig 30 Bridged shorts Fig 31 Remote shorts
As with the result of the Crossover fault shown in Fig 20 and Fig 21, all wiremap test results
are displayed as a graphic that includes the FAULT icon. When the icon is selected, the faults
are presented as a list.
The indications that follow appear on the Active Remote device:
Flashing green LED – Test Passed.
Flashing red LED – Test Failed.
Amber LED – DC voltage greater than 12 Volts detected – cannot perform test.