IDEAL Networks SignalTEK NT, Руководство пользователя

Страница: 7 / 58

SignalTEK NT 156875 Iss 3
User Guide Page 7
To switch OFF either unit, press and hold the Power button for approximately 1/2 second, a
shutdown message is displayed on the screen. The currently stored setup is saved. If the unit
does not switch OFF within five seconds, see Master Reset . Always switch OFF the unit
before removing the power module.
Caution
Do NOT remove the power module when the unit is switched on.
Power Saving
Near-End Unit. Power saving preferences are selected from SETUP>SYSTEM>PREF. Auto Off
can be Disabled (unit remains ON indefinitely), or set to switch the unit OFF after three, 10 or
30 minutes of inactivity. The backlight can be set to Always On, or to dim to 50% brightness
after three minutes of inactivity. Note that when mains power is connected the display is
always on full brightness and the unit remains ON indefinitely.
Remote Unit. The remote unit remains ON indefinitely whether on battery or mains power.
Master Reset
In the unlikely event of a system lock-up which prevents the unit from being switched OFF, it
may be necessary to perform a master reset. This will not delete any stored data.
Remove the power module to access a small aperture in the SignalTEK NT (Fig 3).
Insert a paper clip into the reset hole and press the internal reset switch.
Fig 3
Replace the power module.