IDEAL Networks SignalTEK NT, Руководство пользователя

Страница: 14 / 58

SignalTEK NT 156875 Iss 3
User Guide Page 14
Setup menu descriptions
From the home screen, press the soft key SETUP (F3) to display the
Setup menu shown in Fig 13. The settings for all tests, functions and
preferences can be changed and saved from here.
Selecting any of the seven icons will produce the options that follow:
Fig 13
Highlight the System icon and press ENTER to access the settings and preferences listed
below:
Enter your name or your company’s name, address and phone number(s). The details stored
here will appear on all reports exported via a USB key.
This option enables you to manage Jobs as follows: Create new Jobs. View, edit or delete
existing Jobs. Save Jobs to a USB key. Set up Jobs preferences and result Name format. The
‘Activate’ icon selects the Job you require to be active. See Jobs for a full description.
Sets the language for the tester. The on-screen display, and the exported results and reports
will appear in the selected language.
Sets the power saving options, the preferred units of length and the date and time formats.
Export or import setup information to/from a USB key. Use this function when you wish to
copy setup information from one tester to another.
Sets the current date and time. Note that the date and time are recorded against test results
and will appear on exported reports. The internal clock is autonomous of the power module
for up to one day.
For the Near-End Unit this menu item facilitates software updates downloaded from the
IDEAL website and saved to a USB key. Select the update icon and follow the on-screen
instructions. To update the Remote Unit: with unit switched OFF, insert USB key and then
PRESS and HOLD the AUTOTEST key while switching on the unit.
The LEDs will illuminate in sequence indicating that a software update is in progress. The unit
reboots when the update is complete.
Provides model, software, hardware and firmware information.
Provides the option to return all settings to the factory default. The Near-End and Remote
Unit must be paired after resetting to factory default. Refer to PAIR on page 18 .
A FACTORY RESET WILL REMOVE ALL STORED
DATA
AND PAIRING INFORMATION
FROM THE TESTER