Test Strip Description
•
Your system measures the amount of sugar (glucose) in whole blood. Blood is applied to the
absorbent hole of the test strip and is automatically drawn into the reaction cell where the
reaction takes place.
•
The test strip consists of the following parts:
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further
Test Strip Handle
Hold this part to insert the test strip into the slot.
Confirmation Window
This is where you confirm if enough blood has been
applied to the Absorbent Hole of the strip.
Absorbent Hole
Apply a drop of blood here; the blood will be sucked automatically.
•
Refer to the section below: “Taking Your Blood Glucose Reading,” for complete instructions.
Important Test Strip Information
•
Store test strip packages in a cool, dry place below 40°C (104F). Keep away from direct sunlight
and heat. Do not refrigerate.
•
Store your test strips in their original vial only; do not transfer them to a new bottle or any other container.
•
After removing a test strip from the vial, immediately replace the vial cap and close it tightly.
•
With clean, dry hands, you may touch the test strip anywhere on its surface when removing it from
the vial or inserting it into the meter.
•
Use each test strip immediately after removing it from the vial.
•
Write the discard date on the vial label when you first open it. Discard remaining test strips and
the vial 90 days after first opening date.
•
Apply only blood sample or control solution to the absorbent hole. Applying other substances to
the absorbent hole will cause inaccurate results.
•
Do not use test strips beyond the expiration date printed on the package since they may cause
inaccurate results.
•
Do not bend, cut or alter a test strip in any way.
Before You Start
IDEAL LIFE Gluco-Manager™
12
Ideal Blood Gluco Manual 9/24/07 12:25 PM Page 12
