Chapter 6
Test description and procedure
46
6.12.1.
Performing test
1.
Select Setup.
2.
Set the type of loop specified by the measuring instrument with active layer.
3.
Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
4.
Select Run to start the test.
6.13.
PC Diagnosis
With this test the LanXPLORER can provide information on the MAC and IP level of the
connected PC. Moreover information is output on data transfer (traffic).
1.
Select the menu point "PC Diag"
.
2.
Select Run to start the test.
6.14.
Statistics
The availability of individual statistics depends on the model version and test setup of the
LanXPLORER.
Statics are kept automatically on active networks and saved together with the tests
performed.
1.
Select the menu point "Stats" on the standby
screen
.
2.
Select the desired statistics to be displayed.
Figure 51: PC Diagnosis
52
