IDEAL INDUSTRIES LanXPLORER Скачать руководство пользователя страница 41

Страница: 41 / 54

Chapter 6

Test description and procedure

6.5.3.

Display results

It is possible to view the test details on the individual hosts.

IP address

MAC address

Services

Station name

Select the desired option to display a host overview.

Mark the host for which you want to view more details.

Select the Details.

6.6.

Verify

This test allows a Netmap already saved to be compared with the current Netmap.

6.6.1.

Performing test

Select Setup to select the Netmap already saved for comparison.

Select the file to be compared and confirm your selection with Apply.

NOTE:

The name of the file selected for comparison then appears in the menu window at the top
right.

Select Run to start the comparison test.

The LanXPLORER then displays a comparison list for the
current Netmap and the saved Netmap.

Image

Description

same

The same host was recognized in the
comparison file and the current Netmap.

diff

The host is new in the current Netmap or
the host is not present in the current
Netmap

Saving Netmap for comparisons - Verify

The current device list can be saved in the instrument and used for comparison with new
tests (see 6.5.2).

6.6.2.

Display results

Show comparison list

It is possible to view the test details on the comparison test.

Figure 46: Verify - Comparison

overview

Содержание LanXPLORER























































Результаты поиска

Содержание LanXPLORER

Отзывы:

Похожие инструкции для LanXPLORER

Бренды по названию

Популярные бренды

IDEAL INDUSTRIES LanXPLORER, Руководство пользователя

Результаты поиска

Содержание LanXPLORER

Отзывы:

Похожие инструкции для LanXPLORER

Бренды по названию

Популярные бренды