Chapter 6
Test description and procedure
48
10.
In the option
Code type
, set ASCII or HEX.
NOTE:
The information required for setting the network has to be requested from your system
administrator.
If a Default Accesspoint has been saved in the LanXPLORER, when activated, the device
connects to the WiFi function automatically using this Accesspoint.
11.
Select Apply in order to take over the settings.
12.
Select Join in order to connect with the network.
13.
Confirm the screen message with OK.
The SSID of the network with which you are connected will be displayed in bold and
underlined.
14.
Select Save to store all test results in the current job.
15.
Select Details to view further information on individual networks.
6.15.2.
Performing tests
The name of the IP address and of the network is shown on the standby screen with which
the device has been connected.
1.
Select the menu point "Tests" on the standby screen
.
22.
Select the desired individual test.
23.
Perform the test.
The result is stored in the short-term memory and displayed in the test summary.
