MAIN FEATURES
MODE SELECTION
You can choose to run your Halo
in Auto, Manual or Off mode.
Auto: runs your heating to
pre-set scheduled times and
temperatures.
Manual: you control the
temperature by manually turning
the dial, there are no
set schedules.
Off: your heating will be set to a
low temperature (default 5°C) for
frost protection.
Move between Auto, Manual
and Off modes using the right
hand side button, scroll down the
menu using the dial and push
to select.
USER GUIDE
Welcome to your new Ideal Halo control. This thermostat will help you to control both your heating
temperature and the times that your heating is on.
Halo is a battery powered, wireless control that uses
a protocol called Zigbee to communicate with the
Smart Interface that plugs into the boiler.
This user guide is applicable to both the Halo Combi
RF and Halo Combi Wi-Fi control along with their
respective upgrade kits. Each Halo unit controls a
separate central heating zone independently to any
other Halo unit. Schedules and target temperatures
are not shared between units.
Halo Combi RF is a non-connected control
(control is via the Halo Combi unit only).
Halo Combi Wi-Fi is a wireless heating control that
is connected to the internet. You can download the
Halo app on Google Play or the Apple app store. You
will not have to pay to use the app.
For more information on the features in your Halo
app visit the Help section of the app or
idealheating.com.
1
2
9
1
menu
Sat, 17 Nov
mode
auto
9:33pm
0
5
target temp
until 10:00pm
current room
temp
1
2
9
1
menu
Sat, 17 Nov
mode
auto
9:33pm
0
5
target temp
until 10:00pm
current room
temp
back
Sat, 17 Nov
confirm
9:33pm
Auto
Manual
Timed heating on, temperature
controlled by schedule
TOP TIP:
Your Halo is designed to provide the perfect balance of comfort and effi ciency. It has a feature
called Enhanced Load Compensation which balances the temperature in your radiators to maintain
the target room temperature with optimum effi ciency. As a result you might notice that when the
temperature in your home reaches the target your radiators are not hot to touch. By controlling the
temperature in your radiators your system is working in the most effi cient way for you.
If you have purchased a Halo Combi RF (non-connected control) you can upgrade this to an internet heating
control by downloading the Halo app and following the steps in the app to connect your Halo control. You
will be required to pay a connection fee to upgrade to app controlled heating.
The current mode is
displayed bottom right
Press the right hand button
to change the mode
Use the dial to scroll between
the different modes (Auto,
Manual and Off) and then
push the dial or press the right
hand button to confi rm your
selection
The temperature
scale in the centre
will be orange
and red when the
heating is on
Central heating zone the
Halo PRT is controlling
Text relating to left
hand button. Use this
to enter the menu
Target temperature
Left hand button
Turn dial to adjust temperature or
navigate menu. Push dial to select
The fl ame symbol
is present if the
heating is on
Current temperature
is the current
temperature in
your home
Text relating to right
hand button. Shows
whether the Halo is in
Auto, Manual or
Off mode
Right hand button
