IDC Mikro, Руководство пользователя

Страница: 37 / 44

37
C L E A N I N G A N D M A I N T E N A N C E
E N
To remove the collet:
▷
Apply the spindle wrench to the collet.
Fig. 11
▷
Insert a milling tool into the open collet.
▷
Using the spindle wrench, unscrew the collet out
of the spindle.
Fig. 12
▷
Clean the collet holder.
The collet holder must be free of shavings/chips
and debris.
Fig. 13
▷
Clean the inside of the collet with the fine collet
brush.
Fig. 14
▷
Apply a slight coat of collet grease to the
threads of the collet.
▷
Screw the cleaned and lubricated collet in
reverse order to the stop back into the spindle.
When the milling tool was from the milling
machine tool holder:
▷
Place the tool properly positioned back into the
tool holder.
NOTE:
Only use the provided collet grease when main-
taining the collet cone.
CAUTION:
Danger of tool breakage!
▷
Make sure to remove the milling tool from the
collet chuck!
OBJ_DOKU-0000004940-001_de_en.fm Page 37 Thursday, April 30, 2015 2:34 PM