IDC Mikro, Руководство пользователя

Страница: 36 / 44

36
C L E A N I N G A N D M A I N T E N A N C E
E N
7 Cleaning and Maintenance
7.1 Cleaning
The milling machine must be cleaned after each
working day.
▷
Open the door of the milling machine.
▷
Press operation button [A] on the milling
machine.
The extraction system is activated. The opera-
tion button lights up.
▷
Press service button [B] on the milling machine.
The sealing air at the spindle is activated. The
service button lights up.
▷
Remove the collecting plate.
▷
Vacuum out the milling chamber.
▷
Briefly press service button [B].
The sealing air is deactivated.
▷
Briefly press operation button [A].
The extraction system is deactivated.
7.2 Maintenance
7.2.1 Weekly maintenance
Prior to maintenance:
Before maintaining the spindle, the spindle sealing
air must be activated:
▷
Briefly press service button [B].
The current tool is placed down and the spindle
returns to the service position. The spindle is
released; the motor is blocked.
▷
Open the door of the milling machine.
▷
Press service button [B] on the milling machine.
The sealing air is activated. The service button
lights up.
After the maintenance
When the maintenance is completed:
▷
Shut the door of the milling machine.
▷
Briefly push operation button [A].
The tool is picked up again. The spindle travels
back to the starting position or to the position,
where the program was interrupted.
Spindle
The provided spindle service set and a milling tool
of your choice are required for maintenance of
the spindle.
In order to clean the spindle:
▷
Remove any dust from the cap and the spindle
using a dry, soft cloth. Do not use cleaning
agents!
NOTE:
Zirconia dust is abrasive!
▷
Clean the window in the door carefully, using
only a soft cloth; do not scrub or scour.
NOTE:
Danger of damaging the machine!
▷
Do not use compressed air, ultrasonic or a
steam jet for the cleaning!
OBJ_DOKU-0000004940-001_de_en.fm Page 36 Thursday, April 30, 2015 2:34 PM