ID TECH VP5300M User Manual
Page | 31
4.
The L100's front display now shows two options:
Enable PinPad
, and
Enable CR
(in this case, CR
means "card reader"). Use the
#
and
*
keys to scroll up or down. Select
Enable CR
and press
Enter
.
5.
Setup is now complete. Execute the
Start EMV Transaction
command in the USDK Demo, or start
a transaction from your own software, and then insert a PIN debit card. After the prompt for PIN
comes up, the unit should display this:
Note:
The test card must be a PIN-capable EMV card. We recommend using the appropriate test
card from a deck of test cards.