ID TECH VP5300M User Manual
Page | 26
9.
The device prompts to reenter the password. Enter the new Password 2 again to confirm it.
After entering the new Password 2 for a second time, the device beeps twice to confirm the
input. The SmartPIN L100 Removal Detection passwords are now set.
10.
The next menu on the L100 screen has the option to
Enable
. Choose the top option (scroll up
or down using the * and # keys) and press the green
Enter
key. The device displays an
"Activate Success" prompt to indicate success.
11.2.
Setting up the VP5300M
To set up the VP5300M for chip-and-PIN operation, you will need to configure the unit to operate in
Configuration 3C. Out of the box, the VP5300M uses the
4C configuration
, which indicates the reader
performs EMV transactions without a PIN pad.
Switching the unit to a 3C configuration can be done easily with ID TECH's free USDK Demo program
on any Windows computer. Download the free demo program from the
(look for the USDK_DEMO zip file). No registration is required.
1.
Launch the USDK Demo program and plug the VP5300M into the USB port of your computer.
Verify that the VP5300M is shown as selected on the left side of the window:
