User‘s Manual IB-SP202-BT
Playing music
-
Press PLAY/PAUSE key (3) to play or pause the current title.
-
Press NEXT/VOL+ key (5) to select next title, press PREV/VOL- key (6) to select previous title.
-
Press and hold NEXT/VOL+ key (5) to increase the volume. Press and hold PREV/VOL- key (6) to decrease the volume.
-
You can also use the connected device to control the playback and volume.
Hands-free mode
The IB-SP202-BT has an integrated microphone at the front (best speakerphone performance within 30 ~ 60 cm distance).
-
For an incoming call press the PLAY/PAUSE key (3) of the host speaker (purple) to answer.
The LED indicator of the host speaker LED flashes alternately red and purple.
-
To ignore the incoming call press and hold PLAY/PAUSE key (3) of the host speaker (purple).
-
Press PLAY/PAUSE key to end telephone calls.
-
Press and hold NEXT/VOL+ key (5) to increase the volume. Press and hold PREV/VOL- key (6) to decrease the volume.
Last Call Function
To redial for last called number via Bluetooth speaker, even when it is in music playing mode.
1.
Press the PLAY/PAUSE key (3) twice to enter into redial function, the playback will pause and switch to hand free function for redial.
2.
Short press the PLAY/PAUSE key (3) again to hang up the redial call.
Note
: Make sure that your mobile phone has last dial call used, if not, the redial for last call function cannot be activated.
AUX IN Function
Note: Bluetooth stereo pairing mode is not possible during AUX IN connection.
-
During activated Bluetooth stereo pairing mode, if you insert the AUX in cable into one of the host or slave device’s AUX IN (10),
both devices will be disconnected from Bluetooth stereo pairing mode. This means only one device is able to be working as
an AUX IN speaker, and the second speaker will be turned into waiting mode and automatically turn off.
-
When you disconnect from the AUX IN jack, both devices should be reconnected via Bluetooth automatically if both of
them are still in operation mode. If not, switch both device’s power to OFF and then turn them ON again for reconnect into
Bluetooth stereo pairing mode.
1.
Connect the Bluetooth speaker’s AUX IN (10) with an external device’s AUX / LINE output through an audio cable (included).
2.
The Bluetooth Speaker will switch from Bluetooth mode to AUX IN mode automatically, and the LED indicator (7) lights red.
3.
Now the AUX IN function is enabled and you can use the connected device to control the playback and volume.
4.
You also can use Bluetooth speaker control to in-/decrease the volume and pause and resume the playback.
RESET function
In some circumstances, the speakers may encounter technical issues during use. These devices have been designed with a built-in
reset button (9) which is located on the back side of the devices.
To Reset:
1.
Use a 0.8 ~ 1 mm stick or similar object (e.g. toothpick, paper clip), and carefully insert into the reset hole (9) until you will
hear and feel a click and the device should turn to OFF immediately.
2.
Press and hold the ON/OFF button (2) to turn On and restart the device after reset is done.
3.
Important: Do not reset the device if it is proper working.
Low power reminder and auto sleep
1.
The Bluetooth speaker will send a series of sounds by every minute. When you heard this reminder, please connect the
device to the USB power for charging, if you still want to use the device.
2.
If not, the Bluetooth speaker will power OFF automatically when the battery is keeping low energy level in some minutes.
3.
In this case, the device cannot be turned On, until you recharging the battery at least 10 ~ 15 minutes, because the rechar-
geable battery has not enough energy.
