5.
Click
Save and Return to Menu
.
6.
The
Expander Programming
window is displayed. Set the number of doors to
2
and check the
Program
checkbox to the right.
7.
Click
OK
. The reader expander will register with the controller and restart.
8.
Navigate to
Expanders | Reader Expanders
. If the newly added Inovonics module reader expander was not
renamed in Step 3 above you can rename it here.
9.
Click
Save
.
Linking Inputs to Inovonics Devices
1.
Navigate to
Programming | Inputs
.
2.
Select an input to link to the Inovonics devices or click
Add
to create a new input.
3.
Set the following
Address
options:
-
Module Type
: Reader Expander.
-
Module Address
: the Inovonics module
Physical Address
as assigned above.
4.
In the
Commands
field add the command:
GenericDeviceID=#
where
#
is the serial number of the Inovonics device.
Enter the full serial number of the device, including the first two digits in small font.
If the device is a multi-button remote or a device with multiple inputs, define which specific button/input will
trigger the input operation by adding a comma and the button/input number.
For example,
GenericDeviceID=12345678,4
means the input is linked to button 4 of device number
12345678. If the button/input number is not specified, button 1/input 1 will be linked to the input by default.
5.
Click
Save
and download the changes to the controller.
Inputs Table (PRT-IVO-IF)
This section applies only to the NA / AUS / NZ variant of the Inovonics Receiver Module (PRT-IVO-IF).
Refer to the table below to correctly program the specific button/input that will trigger the input operation.
Wireless Transmitter
Product Code
Input
Number
Physical Link
Alarm
Messages
Universal Transmitter
EN1210
1
Input
Case Tamper
Low Battery
Universal Transmitter Dual Inputs
EN1212
1
Input 1
Case Tamper
Low Battery
2
Input 2
Universal Transmitter Dual Inputs with Wall
Tamper
EN1216
1
Input 1
Case Tamper
Low Battery
2
Input 2
Universal Transmitter with EOL protection
EN1215EOL
1
Input
Case Tamper
Low Battery
Door/Window Transmitter
EN1210W
1
Input
Case Tamper
Low Battery
2
Reed
Door/Window Transmitter with EOL
protection
EN1215WEOL
1
Input
Case Tamper
Low Battery
2
Reed
PRT-IVO-IF | Protege Inovonics Wireless Receiver Module | Installation Manual
20
