Ethernet 10/100 Network Connection
The Inovonics receiver module can communicate with the Protege controller via a 10/100 ethernet connection
using the encrypted UDP protocol.
When installing an ethernet connection the module should be interfaced using a standard segment (<100m in
length) and should be connected to a suitable ethernet hub or switch:
Temporary direct connections can be used for onsite programming by using a standard ethernet cable.
Installing the module on an active network requires knowledge of the configuration and structure for the network.
Always consult the network or system administrator and ask them to provide you with a fixed IP address that can
be assigned to the module.
PRT-IVO-IF | Protege Inovonics Wireless Receiver Module | Installation Manual
15